SAE J2635 喷漆铝车轮和喷漆铝车轮装饰的丝状腐蚀试验程序(镀铝轮子和镀铝轮眉的丝状腐蚀试验规程)

SAE J2635-2007发行信息

标准号SAE J 2635-2007

中文名喷漆铝车轮和喷漆铝车轮装饰的丝状腐蚀试验程序

英文名Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

发布日期2007-08-01

实施日期

废止日期无

中国标准分类号T22

国际标准分类号43.040.50

发布单位US-SAE

引用标准ASTM B 368-1997 ASTM D 1193-2006 SAE J 2634-2003 SAE J 2636-2006

SAE J2635-2007适用范围

This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application. To establish a uniform test method for the wheel and wheel trim industry when assessing the resistance of components to filiform corrosion. An objective is to reduce test procedure proliferation and thereby reduce costs for establishing and maintaining unique test facilities, test methods, measurement methods, laboratory accreditations, and operator training. The net effect is to reduce cost while improving the quality of the test data by adopting uniform and standardized test methods. The procedure does not establish performance standards for the components. Performance standards are to be established by the users of the test and/or their clients. The method and format for documenting proficiency is defined.

本试验程序规定了在涂漆铝车轮和涂漆铝车轮装饰件上产生和评估丝状腐蚀的实验室程序。虽然本试验专为测试涂漆铝车轮和车轮装饰件而开发，但它可能适用于其他部件。应用程序所有者需要评估此测试是否生成与相关使用中发现的丝状相似的丝状，以确保为应用程序提供准确的数据。在评估部件耐丝状腐蚀性时，为车轮和车轮装饰件行业建立统一的试验方法。目标是减少测试程序的扩散，从而降低建立和维护独特测试设施、测试方法、测量方法、实验室认证和操作员培训的成本。净效果是通过采用统一和标准化的测试方法，在降低成本的同时提高测试数据的质量。本程序未建立部件的性能标准。性能标准由测试用户和/或其客户制定。定义了记录熟练程度的方法和格式。