耐候性試驗
Weathering Testing
咨詢熱線
18566398802
IEC 60068-2-52
IEC 60068-2-52標準介紹
IEC 60068-2-52英文簡介
Can be used to test the relative resistance to corrosion of components or equipment, when exposed to a changing climate of a salt mist (spray), followed by a high humidity, at an elevated temperature.
Test specimens are placed in an enclosed chamber (a separate salt mist chamber and controlled humidity chamber are generally used), and exposed to a changing climate that comprises of the following 2 part repeating cycle. 2.0 hours exposure to a continuous indirect spray of neutral (pH 6.5 to 7.2) salt water solution, which falls-out on to the specimens at a rate of 1.0 to 2.0ml/80cm2/hour, in a chamber temperature of +15 to+35C. This is followed by either 7 days or 20 to 22 hours (depending on the test severity) exposure to a high humidity climate of 93%RH, in a chamber temperature of +40C. The number of cycle repeats is variable depending on the test severity. One storage period of three days at 21C-25C at 45% - 55%RH is also required
For further information on IEC standards visit; www.iec.ch
Q-fog鹽霧試驗箱用于IEC 60068-2-52的測試方法
Q-fog鹽霧試驗箱用于IEC 60068-2-52的測試方法
溫馨提醒：本IEC 60068-2-52可能存在更新的版本，建議尋找IEC 60068-2-52的發行商確認。
符合 IEC 60068-2-52 標準的
老化試驗箱
-
鹽霧腐蝕試驗機
Q-FOG CCT1100鹽霧腐蝕試驗機具有1103升大容量測試能力，可在一臺機器中實現高濕度、干燥、靜止、加熱等多個不同的循環測試條件。
Q-FOG CCT1100 馬上詢價 -
鹽霧試驗箱
Q-FOG CRH1100是一款的具有相對濕度控制功能和溶液噴淋功能的鹽霧試驗箱.
Q-FOG CRH1100 馬上詢價 -
鹽霧試驗箱
Q-FOG CRH600比起SSP/CCT鹽霧試驗箱增加了一個可調濕度控制功能，這意味著CRH鹽霧試驗箱具備更廣泛的標準適用范圍。
Q-FOG CRH600 馬上詢價 -
鹽霧腐蝕試驗箱
Q-LAB CCT600鹽霧腐蝕試驗箱不僅具備了SSP 鹽霧試驗箱的所有優點，同時還增加100%濕度功能。CCT600測試樣品容量為640升
Q-FOG CCT600 馬上詢價
粵公網安備 44060402000067號