首頁 > 標準大全 > ASTM D5894-16標準詳情

ASTM D5894-16

　　本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用。我們愿意和您交流ASTM D5894-16標準細節信息或ASTM D5894-16測試方法，歡迎致電【18566398802】

ASTM D5894-16標準介紹

ASTM D5894-16英文簡介

1. ASTM D5894-16Scope

1.1 This practice covers basic principles and operating practice for cyclic corrosion/UV exposure of paints on metal, using alternating periods of exposure in two different cabinets: a cycling salt fog/dry cabinet, and a fluorescent UV/condensation cabinet.

1.2 This practice is limited to the methods of obtaining, measuring, and controlling exposure conditions, and procedures. It does not specify specimen preparation nor evaluation of results.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

ASTM Standards

D610 Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

D714 Test Method for Evaluating Degree of Blistering of Paints

D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

D4587 Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

G85 Practice for Modified Salt Spray (Fog) Testing

G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

G147 Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests

G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

G154 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

Q-fog CRH鹽霧試驗箱用于ASTM D5894-16的測試方法

溫馨提醒：本ASTM D5894-16可能存在更新的版本，建議尋找ASTM D5894-16的發行商確認。

符合 ASTM D5894-16 標準的
老化試驗箱

鹽霧腐蝕試驗機
Q-FOG CCT1100鹽霧腐蝕試驗機具有1103升大容量測試能力，可在一臺機器中實現高濕度、干燥、靜止、加熱等多個不同的循環測試條件。
Q-FOG CCT1100 馬上詢價
鹽霧試驗箱
Q-FOG CRH1100是一款的具有相對濕度控制功能和溶液噴淋功能的鹽霧試驗箱.
Q-FOG CRH1100 馬上詢價
鹽霧試驗箱
Q-FOG CRH600比起SSP/CCT鹽霧試驗箱增加了一個可調濕度控制功能，這意味著CRH鹽霧試驗箱具備更廣泛的標準適用范圍。
Q-FOG CRH600 馬上詢價
鹽霧腐蝕試驗箱
Q-LAB CCT600鹽霧腐蝕試驗箱不僅具備了SSP 鹽霧試驗箱的所有優點，同時還增加100%濕度功能。CCT600測試樣品容量為640升
Q-FOG CCT600 馬上詢價
鹽霧老化試驗箱
Q-fog SSP1100機型鹽霧老化試驗箱容量為1103升，可用于Prohesion測試或傳統鹽霧測試包括Prohesion, ASTM B117 及 G85, BS 3900 F4等標準的測試
Q-FOG SSP 1100 馬上詢價
鹽霧腐蝕試驗箱
Q-FOG SSP600主要用于傳統鹽霧試驗、Prohession以及大多數汽車循環測試，箱體容量為640升。
Q-FOG SSP600 馬上詢價

近期文章